WAGO Modular IO System INTERBUS S Manual de servicio descargar pdf (Pagina 33)

INTERBUS / General conditions

 :$*2Ç,2Ç6<67(0

7 General conditions

This chapter describes the general conditions for error-free running of the

:$*2Ç,2Ç6<67(0

7.1 Transporting and storing conditions

The following declarations concern modules which are transported and stored in the

original package.

Condition allowed values

Free fall

≤ 1m

Temperature -40° to +70° C

Relative humidity 5 to 95% (without condensation)

7.2 Mechanical and climatic conditions

The modules of the :$*2Ç,2Ç6<67(0 are not allowed to be operated without

taking suitable actions

- in places with strong conditions e.g. very dusty rooms or corroding atmosphere

- in place with high concentrations of ionisation

The temperature should be in a range between 0° C and +55° C. The relative humidity

should be in a range of 5 to 95% (without condensation).

The modules should be placed horizontal for better heat dissipation.

The concentration of SO

must be below 25 ppm with a relative humidity of < 75%. The

concentration of H

S must be below 10 ppm with the same humidity.

The mechanical conditions are given as sinusoidal oscillations.

Frequency range (Hz) continuous sometimes

10 ≤ f < 57

0.0375 mm amplitude 0.075mm amplitude

57 ≤ f ≤ 150

0.5 g constant acceleration 1 g constant acceleration

For stronger impulses and oscillations, the acceleration and the amplitude should be

reduced by suitable actions. The following table shows the type of test for the

mechanical conditions.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 160 161

Sin comentarios

WAGO Modular IO System INTERBUS S Manual de servicio Pagina 33